|
|
Senco Compressor
|
The Senco PC1010 Air Compressor is one I recommend for the SOM II. It is a quiet (~67dB), oil-free, low maintenance compressor. Weighing is at 20 pounds and featuring a convenient carry handle, it is very portable. It comes pre-configured with pressure regulator and quick-connect fitting that mates directly to the SOM II air hose. This compressor is rated at .6 CFM @ 90 psi, and fully powers the SOM II for most levels of play. Please note that a larger compressor is recommended with the SOM II XP.
|
|
|
Cane Set
|
This accessory set, pictured top in the photo at left, includes an oak cane mount and three different canes. Each cane is 30" long, and made of white fiberglass with smooth rounded ends. The availabel diameters are 1/4", 5/16", and 3/8" for a range of delivered sensations. The pair of mount blocks orient in different ways to firmly hold the three different canes. This is the perfect accessory for anyone who likes caning!
|
|
|
Oak Paddle
|
The optional narrow Oak paddle, pictured middle at left, is well-crafted and finished with clearcoat. It is a single piece of American Red Oak measuring 30" long, 1-5/8" wide, and 3/4" thick. This is a stout, narrow paddle that delivers a solid whack.
|
|
|
Staged Paddle Set
|
This accessory set, pictured bottom in the photo at left, consist of three parts of 1/4" Lexan (polycarbonate) used together to provide several spanking sensations. You will always use the longest piece, which is the striker. However, 1/4" Lexan is too flexible for the power of the SOM II. Back the striker with one or both shorter pieces to adjust the flexibility and create your perfect sensation.
|
|
|
Standard Lexan Paddle
|
The original SOM II paddle, 3/8" thick clear Lexan (polycarbonate) with a narrow handle and wider striking surface. This ultra-durable paddle is a great overall end effector.
|
|
|
15' Extension Hose w/ Fittings
|
While you can gain distance between the compressor and SOM II with a hose and fittings from any hardware store, this 15' air hose is a guaranteed fit and stylistic match to the stock hose. Adding this 15' hose means up to 23' from the SOM II to it's compressor.
|
|
|
SOM II Hand Control
|
The SOM II Hand Control is the brains behind the machine, featuring full-fledged well marked user controls that drive the onboard computer. Requires one 9V battery, and delivers periodic 9 VDC output across pins 1 and 2 of a pro audio XLR plug. Drives both the SOM II and SOM II XP. Custom programming of one or more AUTO functions may be available, depending on your requirements... please contact me to discuss prior to purchase.
|
|
|
SOM2PC Control System
|
Use you PC with USB port to take the ultimate control over your spanking sessions! See the SOM2PC page for more details. This system is backwards-compatible to all SOM II units ever sold (if you've got 1/4" plug/jack instead of XLR, contact me). You receive the hardware interface, current software, and future software updates for life.
|
|
|
SOM II Head Unit
|
The standard head unit from the SOM II includes a valve/cylinder combination, driven by an onboard relay that accepts a 9 VDC signal across pins 1 and 2 of the attached pro audio XLR jack. Actuator arm accepts standard SOM II accessories, with two holes spaced 2" apart.
|
|
|
SOM II XP Head Unit
|
The XP head unit from the SOM II XP includes twin valve/cylinder combinations, driven by an onboard relay that accepts a 9 VDC signal across pins 1 and 2 of the attached pro audio XLR jack. Actuator arm accepts standard SOM II accessories, with two holes spaced 2" apart.
|
|
|
SOM II Automater
|
Whether you want to lay a blistering trail of cane strikes across your target or simply introduce variation in aim to your play, the Automater works with your SOM II machine to change the contact point based on your instruction.
|
|
|
SOM II Stand
|
The standard SOM II welded steel stand comes complete from the ground to the 1" Schedule 40 stud. It consists of legs (2), base, vertical, and carriage, plus all of the hardware to assemble it. Includes four non-marking, non-slip rubber feet attached to the legs. All adjustments are continuously variable using hand knobs and channel nuts. Does not include pipe fitting.
|
|
|
SOM II LT Stand
|
The SOM II LT extruded aluminum stand comes complete from the ground to the 1" Schedule 40 stud. It consists of legs (2), base, vertical, and carriage, plus all of the hardware to assemble it. Includes four non-marking, non-slip rubber feet attached to the legs. All adjustments are continuously variable using t-bolts and 13mm nuts. Does not include pipe fitting.
|
|
|
SOM II Pipe Fitting
|
The standard SOM II pipe fitting is a galvanized cast iron right angle crossover fitting for 1" Sched 40 pipe. This fitting attaches the studs from the stand carriage and the SOM II head unit, and secures using the included 1/4" hex key. This fitting allows 360 degree adjustability in all dimensions and locks securely in position.
|
|
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}