[The following text copied from the Robospanker website October 11, 2009. Location: new version product page. Presumtive copyright, DD Machinery 2009. Copy provided under Fair Use.]

Smaller, yet more Powerful than ever!

Our engineers were faced with the following problem. How can we make the machine smaller, yet maintain the same power that the Robospanker machine is so famous for? After much research, they were able to take it even a step further. By making some changed to the leverage applied to the internal trigger mechanism, we were not only able to make the machine much smaller, but were actually able to increase the power of the spank by nearly 40%. The new design is only 20" long, and packs a wallop like you want believe. So powerful now, that we must caution all potential buyers that this machine can cause blisters even when used at the lightest setting. For those who require a lighter spank, we recommend our special padded paddle. You control the speed of the spank with a small hand held remote control. The speed can be adjusted from a slow spank of one spank every 15 seconds, to a fast speed of one spank every 2 seconds. Also, keep in mind that this machine is powered by a quiet yet powerful electric gear motor. It has all the power you need for the butt blistering spank of a lifetime. Don't be fooled into thinking you have to have an air compressor to get a good spanking. This simply isn't true. There is no need to deal with the added expense, noise, setup, and maintenance that can be associated with air compressor units. You should also be aware, that if you like a spanking session that last more than 5 minutes, there is a good chance that air compressor controlled units will loose too much pressure to maintain the same spank intensity, and speed. If you are considering purchasing a spanking machine that operates by an air compressor, you should also be aware of the following: Although the manufacturers of these products will try to play down these facts, you should be aware of the inherent health risk of air compressors.. These factors, among others, is why we decided to drop our pneumatic version of the Robospanker.

How does the Robospanker compare to pneumatic controlled machines?

The use of pneumatics with spanking machines, certainly brings some advantages to the table. Among them is smaller size and lighter weight machines. However pneumatic controlled machines also brings a lot of disadvantages as well. Most of the disadvantages are associated with the air compressor which is required to operate the machine. Just the additional noise and vibration from some air compressors, can make the machine quite intolerable inside of a house, or small apartment. Most people who are into spanking just want to have a good solid spanking, and really do not want the extra hassles, and hazards that come with the operation, and maintenance of air compressors. If you are considering purchasing a spanking machine which is powered by pneumatics, we strongly recommend that you read the manual that comes with the air compressor recommended for the machine. Please click on the following link to view the air comressor manual recommended by one manufacturer of a pneumatic controlled spanking machine. This manual states that the air compressor should only be used in well ventilated areas. Do you consider your bedroom to be well ventilated? The manual also warns that in order to reduce the risk of the tank exploding, you should drain moisture from the tank daily, or after each use. Do you really want to go through all of that just for some spanking fun? It also warns that there is a risk of fire if the filter gets too dirty. Lets face it, your just looking to have a good solid spanking. Do you really want to take on the extra expense, hassles, hazzards, and not to mention noise that comes with almost all air compressors. That is why we do not use pneumatics with the Robospanker. Our goals is to provide you with good spanking fun that is both safe, and simple.